Table of Contents
Advertisement
10.5.5 Installing the cables for the model M93p server
See Figure 29 for connector locations and cabling.
1
14
13
INT/
172.31.1.X
12
11
Figure 29. TSSC connectors and cabling (model M93p)
1 Power brick
2 Port 3 to USB extension cable, keyboard
3 Port 4 to USB optical drive
4 Power connector to power brick
5 Video connector to VGA extension cable
6 Serial port to attached subsystem
7 Port 2 to Ethernet adapter (EXT CALL HOME)
Note: Ensure that the TSSC tray assembly is fully extended at the front of the rack before routing the
cables through the cable management arm.
__ 1. Verify that all existing cable connections are attached as shown in Figure 29.
2
AOTM
EXT
CALL HOME
10
5
3
4
Power
Port 4
DVD DRV
Port 3
KEY BRD
Port 5
AOTM
9
8 Port 1 to Ethernet adapter (INT/172.31.1.X)
9 Port 5 to Ethernet adapter (AOTM)
10 Ethernet for AOTM
11 Ethernet for broadband call home/remote support
12 Ethernet for attached subsystem (INT/172.31.1.X)
13 VGA extension cable, video
14 USB extension cable, keyboard
Installation (Sections 9 through 12)
6
7
8
Port 2
EXT/CALL
Port 1
INT/
172.31.1.X
39
Advertisement
Table of Contents
