Step 1 Install Casters - GE GPT225SGLWW Installation Instructions Manual

STEP 1 INSTALL CASTERS

WARNING
Use two or more people to move and install the
dishwasher.
Failure to do so may result in back or other injury.
• Move the dishwasher close to its intended use and
storage location.
• Place two shipping corner posts or other protective
material behind it.
• Carefully lay the dishwasher over onto its side and rest it
on the protective surface.
Shipping corner posts or
other protective material
• Firmly push casters into holes as shown. Casters must
be inserted completely. Pull on each caster to make sure
they are secured in position.
NOTE: It may be helpful to place a piece of wood
between the caster wheels and then lightly tap the wood
with a hammer.
• Carefully upright the dishwasher onto its casters.
WARNING
Do not push down on an open door.
Failure to follow these instructions can result in death,
serious injury or cuts.
Installation Instructions
- Excessive Weight Hazard
Make sure each caster
is completely seated
and secured in place
If needed, place block of
wood between wheels
and tap it to seat
- Tip-Over Hazard
STEP 2 INSTALL FAUCET ADAPTER
The special faucet adapter supplied with your dishwasher
must be attached to the sink faucet before you can use
your dishwasher.
The faucet adapter is designed to fit standard spouts
having internal or external threads. You will find the
adapter and two washers in the faucet adapter packet
in your dishwasher.
Attach the Faucet Adapter
• To install faucet adapter, first remove the old aerator or
trim ring on your faucet spout.
External Threads
• If faucet has external threads: Insert the
thinner of the two washers into the faucet
adapter and attach it to the faucet spout.
• Tighten with pliers.
Internal Threads
• If faucet has internal threads: Insert both
of the washers into the faucet adapter
and attach it to the faucet spout.
• Tighten with pliers.
Non-Standard Threads
• If the faucet adapter threads do not match your faucet
spout, your local hardware or plumbing supply store
normally has additional fittings to adapt your faucet spout
to the special faucet adapter.
A sink spray attachment hose can burst if
CAUTION
it is installed on the same faucet as your
dishwasher. We suggest that you disconnect the sink spray
attachment, if your sink has one, and place a cap over the opening.
adaptor install
Aeroator removal
3