Stiga CP1 534 Series Operator's Manual page 28

4. Mowing is The cutting means is not in good con-
difficult. dition
5. Excessive Damaged or loose parts
noise and/ The pin on the cutting means is out of
or vibration is its seat.
experienced
whilst work-
ing.
Cutting means fittings are loose or the
cutting means is damaged.
12. ATTACHMENTS ON REQUEST
12.1 MULCHING KIT (Fig.26)
Finely chops the cut grass and leaves it on the lawn.
Contact the Authorised Service Centre for the sharpening or re-
placement of the cutting means.
Stop the machine and disconnect the spark plug cable (Fig.
22.B).
Check for any damage or loose parts.
All checks, replacements or repairs should be carried out by your
authorised service centre.
Stop the engine and remove the spark plug cap (Fig.22.B).
Contact an authorised service centre (section 7.3.1).
EN - 8