Operation - Nevir NVR-4004 CF Instruction Manual

7. The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock or injury.
8. Do not use the appliance outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface.
10. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.
11. Do not use the appliance for other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a
clean, dry and smooth surface.
2. Move the sliding feed table back and forth a few time to make sure
movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting knob,
clockwise for thinner slice and counter-clockwise for thicker slice. The range of
thickness adjusting is from 0 to 15mm.

OPERATION

CAUTION: ALWAYS USE FOOD PLATEAU SUPPORT AND FOOD PUSHER
1. Plug into 220-230VAC50Hz outlet.
2. Place food to be sliced on the sliding feed table and press the piece holder
against thickness guide. Then pull the sliding feed table against the blade by
hand.
3. The maximum size of food is:110x110x90(mm)(length x width x thick).
4. Switch on the appliance.
5. When the blade is rotating, push the sliding feed table toward blade. Move
tray back and forth steadily. Keep food gently pressed against guide for even
slicer.
13