Table of Contents
Advertisement
Time-setting options
en
When rapid heat up is complete, a signal sounds. The
symbol goes out. Place your dish in the cooking
c
compartment.
Notes
If a cooking time has been set, this runs
■
independently of the rapid heat up process and
counts down immediately when operation is started.
You can use the
l
button to check the current
■
cooking compartment temperature during rapid heat
up.
Cancelling
Press the
button. The
c
the display.
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End
Set a cooking time and an end time. The
*
appliance switches on automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds.
Using the
button, you can request information
l
■
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
Press the
button.
0
1.
The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
The timer starts after a few seconds.
14
symbol disappears from
c
The
symbol for the timer and the time counting down
U
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
signal early.
Cancelling the timer duration
Press the
button to open the time-setting options
0
menu and turn the time back. Press the
close the menu.
Changing the timer duration
Use the
button to open the time-setting options
0
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the
button.
0
Cooking time
If you set the cooking time for your food, operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the
button.
0
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the cooking time
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the
Cancelling the cooking time
Press the
0
button to open the time-setting options
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the
button to open the time-setting options
0
menu. Change the cooking time using the rotary
selector.
button to cancel the audible
0
button to
x
counting down in
button.
0
Advertisement
Table of Contents
