Hisense RD-60WC4SIB User's Operation Manual page 13

13
8. Change screw hole covers and screw
on middle cover plate from left to right
(as shown in figure below).
9.Lie the refrigerator backwards,
Remove ④ (right), Remove three
self-tapping screws from the lower hinge
part(right). Loosen the lower hinge axis
then install it on the reverse hole site,
and tighten into position(change it into
left hinge part). Remove the lower hinge
part to the left-bottom corner of the
cabinet, Then fix it with 3 screws, finally
install part on the left-bottom and
④
right-bottom of cabinet.
10. Stand the refrigerator upright and
carefully slot the lower door onto the
lower hinge pin and hold in position.
install middle hinge-left (in the plastic
bag) ensuring the lower door in secured
in place.
11. Carefully slot the upper door onto
the middle hinge pin and hold in position.
Move the upper door to an appropriate
position, adjust left upper hinge(in the
plastic bag) and upper door, then fit the
hinge pin into the hinge hole at the top
and the door to secure the door in place.
Then fix the upper hinge part with
screws (Please carefully hold upper
door by hand when installing).