Installing The Tpm Module - Intel AXXTPME5 Hardware User's Manual

Installing the TPM module

To install the TPM module, follow these steps:
1. Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2. Remove the server cover. For instructions, see your server system documentation.
3. Insert the standoff into the hole in the server/workstation board and insert the TPM
module connector into the connector in the board. To locate the TPM module
connector and the hole on your server/workstation board, see your
server/workstation board documentation.
4. Press down gently but firmly to ensure that the module is properly seated in the
connectors, and then tighten the tamper resistant screw.
4 Intel® Trusted Platform Module Hardware User's Guide