Auto Display Dimmer; Auto Power Down; Auto Power On/Off - LG SQC4R Owner's Manual

26 Operating

Auto display Dimmer

Function LED will be darkened automatically if there
is no key input for 15 seconds.
When you press any button, the Function LED will be
brighten.

Auto power down

This unit will turn itself off to save electric
consumption if the main unit is not connected to
an external device and has not been used for 15
minutes.
This unit also turns off after six hours if the Main
unit has been connected to another device using the
3
analog input. (Ex : Portable, etc..)
How to deactivate the wireless
network connection(s).
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.

AUTO POWER On/Off

This unit automatically turns on by an input source :
Optical or Bluetooth.
When you turn on your TV or an external device
connected to this unit, this unit recognises the input
signal and select the suitable function. You can hear
the sound from your device.
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected your
Bluetooth device.
This function turns on or off you press
AUTO POWER ON/OFF.
,
Note
y After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
y If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned on
by AUTO POWER function when optical signal
comes in after 5 seconds of no signal.
y Depending on the connected device, this
function may not operate.
y If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turn off the unit.
y When you turn on this unit for the first time,
Auto Power function is turned on status.
y To use this function, the main unit must be
registered in paired devices list of Bluetooth
device.
y You can set the AUTO POWER function only
when this unit is turned on.