LG SQC1 Simple Manual

SIMPLE MANUAL
WIRELESS
SOUND BAR
SQC1
MFL71933323
2207_Rev01 Copyright © 2022 LG Electronics Inc. All Rights Reserved.
SQC1.DAUSLLK_SIMPLE (Sheet)_MFL71933323.indd 1-3
OPTICAL
HDMI IN
OUT
a
PORT.IN OPT.IN
C
b
Replacement of Battery
www.lg.com
A
B
D
HDMI OUT
Installing and Using the Product
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner' s Manual. Some of the content in this manual may differ from your product.
A Sound bar C Wireless Subwoofer - Install it close to the sound bar.
B Function LED / Remote Control Receiver D External Device - (Blu-ray player, game console, etc.)
a Connect the sound bar to your TV via an optical cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
d Using the product with your TV
A Press the F button repeatedly or OPTICAL button once until the OPTICAL LED
B On your TV' s settings, set the output speaker to [Optical] or [External Speaker].
e Connecting the product to your smartphone via Bluetooth
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (
On)
B Press the F button repeatedly until the blinking Bluetooth LED appears on the function LED.
C Find and tap the product on your smartphone. The product appears as "LG SQC1 (XX)" .
D When the product is connected to your smartphone via Bluetooth, the Bluetooth LED
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the
case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the Pairing button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
y Design and specifications are subject to change without notice.
appears on the function LED.
Off >
turns on.
2022-08-30 3:59:46