Table of Contents
Advertisement
34
Operating
AV Sync
Mismatches may occur between the sound of the
sound bar and the images of your TV.
In the case, this function can adjust the delay time.
1. Press AV SYNC.
2. Use C / V to control the time which you can
set at between 0 and 300 ms.
Turn off the sound temporarily
Press [ (Mute) to mute your unit.
You can mute your unit, for example, to answer the
telephone, "MUTE" is displayed in the display window.
To cancel it, press [ (Mute) again on the remote
3
control or change the volume level.
Auto display Dimmer
Display window will be darkened automatically if
there is no key input for 15 seconds.
When you press any button, the display window will
be brighten.
Displaying input source
information
You can display various information of the input
source by pressing J .
OPTICAL/ARC/HDMI IN/PORTABLE : Audio format
BT (Bluetooth) : Connected Bluetooth device name
Auto power down
This unit will turn itself off to save electric
consumption when the main unit is not connected to
an external device and is not used for 15 minutes.
It will also turn off after six hours if the Main unit is
connected to a device using portable input.
When network is connected, the speaker switches to
the network standby mode. Then the LED indicator
on the unit becomes dimmed in white.
If network is disconnected, the speaker switches to
the standby mode. Then the LED indicator on the unit
turns red.
Advertisement
Chapters
Table of Contents
