WARNING
Unplug power plug before cleaning.
Install the RBD Plasma filter and the Antibacterial Catalysis filter
in the unit after complete dry.
RBD Plasma Antibacterial Catalysis Filter
●
Please open the filter cover by pulling the
right side of the cover.
●
Please take out the plasma antibacterial
catalysis filter, and then divide the filter
into two pieces by pushing both hooks
of the filter.
●
When you clean the RBD plasma filter,
please wipe the tungsten wire, the dirties
on the electrode with a wet cloth and then
make it dry with a dry cloth.
※
Never splash the water in the unit or
soak it in water.
Be careful about the down of the tungsten wire.
※
※
Please completely dry, in case that the water gets
into the inside of the filter. (If the inside is taken by
water, please use after dry over 12 hours.)
�