Motorola Moto E13 User Manual page 129

Settings : Connected devices
Miracast is not supported.
To cast an app:
1. Make sure your phone and smart TV or Chromecast are connected to the same
2.
In a cast-compatible app (like YouTube), touch
If you don't see
While casting:
•
You'll see in the
•
You can still make and receive calls and use your phone's other features.
To stop casting:
•
In the app that's casting, touch
•
From the notification, touch
Cast personal media with Wi-Fi Direct
If your TV supports Wi-Fi Direct,
play media from your phone.
For information about using Wi-Fi Direct after you've connected, see the user guide that came with your TV.
Fix an issue
After each step, see if your issue is fixed.
Check the basics
1. If you're using a VPN, turn off the VPN and try again.
2. Make sure your phone and Chromecast or smart TV are connected to the same
3. Move your phone to within 15 feet of your Chromecast or smart TV.
4. If you're using Chromecast or a TV with Chromecast built-in,
Phone can't find smart TV
First, check the basics. Then:
1. On the TV, open the app and start a video. Then on your phone, open the app and try casting to the TV
again.
2. Link the app on your phone to the app on the TV:
a. On your phone, open the app, open its settings, and look for options to watch on TV. (For example,
YouTube >
b. Follow the app's onscreen instructions to complete setup.
3. Reboot your Wi-Fi router.
4. Check your TV for firmware and app updates. See the TV manufacturer's support website for
information.
5. Check your TV manufacturer's support website to make sure the app is still supported on your TV
model.
or don't see your TV listed in the casting options,
status bar.
and touch the option to disconnect.
.
set up a connection
> Settings > Watch on TV > Link with TV code.)
.
between your phone and TV so that you can view or
check for updates
Wi-Fi network.
try these troubleshooting
Wi-Fi network.
to the Home app.
120
steps.