Sunnydaze Decor GSI-837 Quick Start Manual

TABLETOP WATER FOUNTAIN WITH LED LIGHT
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
F
E
D
C
B
A

ASSEMBLY

1. Run the long cord on Pump (C) through Support Ring (B) and place the ring into Basin (A).
2. Connect Pump (C) to Fountain Body (F).
3. Connect Finger Light (D) to the short cord on the pump, then attach the light to the clip on the underside of Fountain
Body (F).
4. Slide Metal Support (E) beneath the fountain body ensuring the fountain is balanced on the support, and place on the
basin. NOTE: Adjust components as necessary to ensure the tubing is not kinked, the light remains connected, and
the power cord is not pinched beneath the support ring.
5. Firmly connect Adapter (H) to the pump power cord.
6. Gently place Decorative Stones (G) into the basin and fill the fountain with enough water to keep the pump fully
submerged during operation; approximately 5 cups.
7. Plug the power cord into a properly grounded GFCI outlet.
NOTE: When first used, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
SPQ0112
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
SOOTHING BALANCE SLATE
CONNECT
/ / Order/Customer Reference Number:
GSI-837
Quiet,
minimal water sound
CONNECT
H
G
10/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No. Parts
A Basin
B Support Ring
C Electric Submersible Pump
D Finger Light
E Metal Support
F Fountain Body
G Decorative Stones
H AC Adapter
IMPORTANT NOTES:
• The water tubing is built into the fountain body. Take care
when handling the water tube; detaching the water tube
from the fountain body will damage the fountain and void
the warranty.
• The light and light cable are rated for contact with water. Use
care when handling the light, dropping the light or jarring
movements may cause the light to burn out prematurely.
• Slate is a natural product; the colors and texture of each
piece are unique so no two fountains will look the same.
Variations in the slate colors and textures are not a cause
for return. Each fountain is cut from large slabs of slate.
Spalling (flaking) may occur naturally over time, and/or if the
slate is dropped. Use care when unpacking and assembling
this fountain.
Qty.
1
1
1
1
1
1
1
PK
1
Page 1 / 2