Sunnydaze Decor GSI-868 Manual

TABLETOP WATER FOUNTAIN WITH LED LIGHT
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
A
B
C
D
E

ASSEMBLY

1. Connect Finger Light (C) to Pump (D).
2. Insert Finger Light (C) into the underside of Fountain Body (B).
3. Connect Pump (D) to the water tube on Fountain Body (B).
4. Gently place the assembled components onto Basin (E).
5. Place Polished Stone Ball (A) onto the fountain body.
6. Gently place Decorative Stones (F) onto the fountain body.
7. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 5 cups.
8. Firmly connect the AC Adapter and plug the power cord into a properly grounded GFCI outlet.
NOTE: When first used, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow. NOTE: When first used, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
SPQ0351
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
ASCENDING SLATE
GSI-868
F
CONNECT
CONNECT
10/2022
/ Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No. Parts
A Polished Stone Ball
B
Fountain Body
C
Finger Light
D Electric Submersible Pump
E Basin
F Decorative Stones
IMPORTANT NOTES:
• The water tubing is built into the fountain body. Take care when handling the water
tube; detaching the water tube from the fountain body will damage the fountain and
void the warranty.
• Adjust the flow control valve on the pump to halfway between maximum (+) and
minimum (-) before first use; maximum flow rate may cause unwanted splashing.
• The light and light cable are rated for contact with water. Use care when handling the
light, dropping the light or jarring movements may cause the light to burn out prematurely.
• Slate is a natural product; the colors and texture of each piece are unique so no two
fountains will look the same. Variations in the slate colors and textures are not a cause
for return. Each fountain is cut from large slabs of slate. Spalling (flaking) may occur
naturally over time, and/or if the slate is dropped. Use care when unpacking and
assembling this fountain. Natural characteristics of slate are not cause for return.
• Check the basin for leaks before assembling the fountain. The sealant used
to join the slate pieces can become cracked if the fountain is not handled with
care. Simply add water and wait to see if water begins to leak. If a leak is
discovered, contact an expert at your local hardware store for an appropriate
sealant and carefully follow sealant manufacturer's instructions to seal the leak.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR SEALANTS.
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Qty.
1
1
Quiet
1
water sounds
1
1
1
PK
Page 1 / 2