Covert MP16 Instruction Manual page 14

TIME LAPSE: Press the ▼ or ▲ arrow to enter the
Time-Lapse option. This option allows your camera
to automatically take a photo without being
triggered by the PIR. If you already set the
Sensitivity to OFF, then the camera will only take
photos when the Time-Lapse option is on. If you
have the sensitivity set to LOW, NORMAL, or HIGH,
the camera will also take photos when the PIR is
triggered. To turn the Time-Lapse option ON, use
the ◄ or ► buttons to choose a time option. 5-60
seconds (in 5 second increments), 2-60 minutes and
1-8 hours. Once you have chosen the time option
you want, press OK to save the setting. The camera
will continuously take photos in timed increments
you set.
NOTE: Remember, this will generate a lot of
photos and you may want to check more
frequently as it will fill the SD card up fast. Use
max size SD card for best performance.