Replacing The Battery Pack - Dialight Vigilant Operation & Installation Instructions

:
WARNING To avoid fire and electrical shock, turn off power at circuit breaker or
fuse and test that the power is off before wiring.
1. Install luminaire as intended using supplemental installation manual(s).
2. Connect the mains supply wires to the luminaire as shown below.
120-277 VAC BATTERY BACKUP SWITCH LIVE –
SYMBOL
L
L'
N

Replacing the Battery Pack

1. Open battery cover by unscrewing six 10-32 captive screws as shown to access battery pack connection.
Page 2
Area Light with Battery Backup UL1598/A / UL844 / UL924
NORTH AMERICA
COLOR CONNECTION
GREEN EARTH
BLACK PERMANENT LIVE
ORANGE SWITCH LIVE
WHITE NEUTRAL
NOTE: For maintained battery backup, connect
the black wire to the supply permanent live and
the orange wire to the supply switch live. For
sustained battery backup, connect both the
orange and black wires to the supply live.
Dialight, 1501 Route 34 South, Farmingdale, NJ, USA 07727
Tel: 732 919 3119
9100HZC280501 REV B
Fax: 732 751 5778 www.dialight.com