About Charging; About The Battery And Charger - 5th Wheel M1 User Manual

9 About Charging

①Open the rubber plug.
Step 1. Open the rubber plug and insert the charger into the charging
port on the scooter.
Step 2. Insert another end of the charger into the power outlet.
Step 3. When charging, the red indicator on the charger will light up.
When the indicator turns green, it means that the scooter is now fully
charged.

10 About the Battery and Charger

M1 electric scooter is equipped with a special lithium battery and a special smart charger. The scooter
and its accessories have a special number. Do not use chargers of other brands, nor should other types
of products be charged with the charger of our company. The company will not be responsible for the
accessories damaged by misuse.
Battery
The lithium battery provided by the company can be recharged for at least 800times, and more than 1,000
times under normal circumstances. Please charge full battery for the first time before using it. The battery
can be charged at anytime, and there is no any damage to charge it frequently. Meanwhile, please don' t
forget to charge it per 3 months if you don' t use it for along term.
22
②Plug in the charger. ③Insert the rubber
plug and fix it after
charging.
Charger
The dedicated charger provided by the company has a function of charging protection .When the battery is
100% charged, the charger will be powered off automatically. The charging time is about 4-5 hours. Damage to
the battery arising from water, collision and other abnormal factors is excluded from the warranty policy.
Charging instructions
1. Open the rubber and insert the plug into the hole;
2. Insert another plug of the charger into the electric outlet;
3. When the indicator lamp is red, it shows the battery being charged; When the lamp turns green, the battery
is finished charging.
4. Please shut down and keep away from water before charging.
5. Only use the specified charger for charging.
Warning: Please be careful not to get electric shock.
6.
Kinetic energy recovery
Press the brake in the running process to enable the kinetic energy recovery system and convert part of kinetic
energy into electrical energy to be stored and used. The kinetic energy recovery system can enhance the
experience of emergency braking. At the same time, the recovered kinetic energy can help increase the
endurance. Changes in the power are displayed simultaneously.
23