Product Specifications; Authentication - 5th Wheel M1 User Manual

14 Product Specifications
Parameter Product name
Model
Dimension Upright: L x W x H
Folded: L x W x H
Weight Net weight
Status Max Load
Main parameters
Max Speed
Travel Distance
Max Incline
Applicable Terrain
Tires
Damping System
Dustproof and
Waterproof Grade
Braking System
LED display
Lighting system
Motor power
Parameters about Charger Rated
Input Voltage
Charging
Lithium battery
Charging time
28
5TH WHEEL Electric Scooter M1
5LCHM11U
Approx. 41 x 19 x 41 inches
Approx. 41 x 19x 17 inches
Approx. 30.8lbs
220lbs
15mph
12.4-13.7mile (
Maximum endurance: Under full power, 75kg load,
ambient temperature 23-25℃, and driving at a constant speed on flat
hardened road at 60% of the maximum speed. The actual endurance
varies according to weight, temperature and road conditions.)
Approx. 15%
Stable and smooth road surface, with bumps less than
2cm and depressions less than 3cm
8-Inch Rubber Tire
Tire Damping
IP54
Motor brake + Foot brake+Drum brake
Speed, Mileage, Gear
LED high-brightness headlight
250W
100V-240VAC 50/60Hz
36V-6AH
4-5h

15 Authentication

Applicable model: M1
The product has passed the ANSI/CAN /UL-2272 certification of the CSA.
The battery complies with the UN/DOT 38.3.
According to the Federal Communications Commission (FCC) Compliance Statement as follows:
The product complies with part 15 of the FCC rules, and the operation must meet the following two conditions: (1) the
product should not cause harmful interference, and (2) the product must accept any received interference, including
interference that may lead to accidental operation. Any change or modification not expressly approved by the responsible
party may make void the user' s right to operate the product.
The EU Compliance Statement is as follows:
WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be disposed of
together with other domestic waste throughout the EU.
Therefore, in order to prevent possible harm of uncontrolled waste treatment to the natural environment or human health,
it is necessary to recycle it and promote the sustainable reuse of material resources. To recycle the used product, use the
return and collection system or contact the retailer who can use the product for environmentally safe recycling.
EU Battery Recycling Information:
Batteries or battery compartments are marked in accordance with the European Directive 2006/66/EC and the amendment
2013/56/EU on batteries and accumulator cells and scrap batteries and accumulator cells.
The directive applies to the recycling framework of waste batteries and accumulator cells throughout the EU. The label on
the battery indicates that the battery should not be discarded, but recycled at the end of its service life according to the
directive.
According to the European Directive 2006/66/EC and the amendment 2013/56/EU, batteries and accumulator cells are
labeled to indicate that they will be collected separately and recycled at the end of their service life. The label on the battery
may also contain the chemical symbols of the relevant metals in the battery (Pb, Hg and Cd). Users should not dispose of
batteries and accumulator cells as garbage, but use the collection framework available to customers to recycle and dispose
of batteries and accumulator cells. With the engagement of users, it is important to minimize any potential impact of
batteries and accumulator cells on the environment and human health due to the presence of potentially hazardous
substances.
Before placing electrical and electronic equipment (EEE) into a waste collection stream or waste collection facility, users of
equipment containing batteries and/or accumulator cells must remove these batteries and accumulator cells for separate
collection.
Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive.
The products and parts (cables, wires, etc.) of Invanti (Beijing) Technology Co., Ltd comply with the requirements of
directive 2011/65/EU on restricting the use of certain hazardous substances in electrical and electronic equipment ("RoHS
recasting" or "RoHS 2")
29