Pairing Another Device; Factory Reset; Warranty - MEE AIRHOOKS PRO Quick Start Manual

Pairing Another Device

To pair the AirHooks Pro to a new Bluetooth device, first unpair the
Airhooks Pro from your original device using its Bluetooth menu or
turn off the Bluetooth functionality on the original device altogether.
The AirHooks Pro will automatically enter pairing mode if a
previously paired device is not found.
Select "MEE audio AirHooks Pro" in the Bluetooth menu of the new
device you wish to pair to complete the pairing process.

Factory Reset

A factory reset can be used to restore all features to their factory
settings and delete all previous Bluetooth pairings from memory.
1. Place the earpieces into the case
2. Press and hold the sync button on the case until the earpieces
flash red two times (approximately 10s). Once the reset is
complete, the earpieces will go directly into pairing mode.

Warranty

This product is covered by a 1-year manufacturer warranty.
For more information, visit MEEaudio.com/support.
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
®
use of such marks by MEE audio is under license. Other trademarks and trade names are those of their
respective owners.
Siri is a registered trademark of Apple Inc.
®
Google Assistant is a trademark of Google Inc.