Dismantling And Disposal; Safety Notes For Dismantling And Disposal - Linde R545 Instructions For Use Manual

Description Reason
Noise during Required
operation flow too high
for pressure
regulator
No changes of Defect
valve control handwheel be-
when turning cause of too
the handwheel high torque,
defect of
spindle, defect
of thread
Moisture on Pressure regu-
pressure regu- lator withdraw
lator (NO dew, energy from
rain or snow) environment
through gas
expansion
Icing on pres- Pressure regu-
sure regulator lator withdraw
(NO dew, rain energy from
or snow) environment
through gas
expansion, lim-
ited delivery
performance
from pressure
gas tanks, e.g.
N2O, CO2
This table is not exhaustive. For questions and ambiguities please contact manufacturer.

10. DISMANTLING AND DISPOSAL

Once the system has reached its end-of-life, it must be dismantled and disposed of in an environmentally
compatible way.

10.1. SAFETY NOTES FOR DISMANTLING AND DISPOSAL

WARNING!
•
Risk of injury through incorrect dismantling!
RESIDUAL ENERGY STORAGE, SHARP EDGED COMPONENTS, TIPS AND CORNERS ON AND IN THE
SYSTEM OR ON THE REQUIRED TOOLS CAN CAUSE INJURY.
•
arrange enough space for working
•
be careful with sharp edges
•
pay attention for order and cleanness
•
loose components can cause accidents
•
dismantle the components properly. Bear in mind that some of the components are heavy. Use lifting
equipment if necessary
•
secure the components against falling or toppling over
Solution Valve
Choose new
pressure
regulator for re-
quired pressure
and flow
Repair by
manufacturer
No failure, nor-
mal operating
state
No failure, nor-
mal operating
state ATTEN-
TION: keep
functionality of
contact gauges
in mind, raise
quantity of
pressure gas
tanks
19/44
Cylinder Line Gas
Regulator Regulator Supply Panel
EN