Installing The Shock Absorber - KTM 250 SX-F PRADO 2020 Owner's Manual

11.21

Installing the shock absorber

–
Remove screws
–
Pull off foot brake cylinder from the push rod.
F01582-10
–
Remove the connecting link of the chain.
–
Take off the chain.
Info
Cover the components to protect them against damage.
S01222-10
–
6
Remove nut
–
Push the link fork back and secure it against falling over.
F01583-10
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
F01584-10
Main work
–
Carefully position the shock absorber into the vehicle from the
bottom.
–
Mount and tighten screw
Guideline
Screw, top
shock absorber
F01585-10
SERVICE WORK ON THE CHASSIS 11
5
.
and the swingarm pivot.
1
.
M10 60 Nm (44.3 lbf ft)
7
.
Loctite ® 2701™
63