inVue LIVE DLD220 Manual

LIVE Panic Button DLD220
IMPORTANT:
Do NOT remove the battery
!
tab until the Panic Button
has been successfully
enrolled into the InVue LIVE
App.
3 Use the smart phone or tablet's
camera to scan the barcode on the
Panic Button (the Device ID can
also be entered manually). Follow
the prompts in the app to set up
the button.
If you already have login
information for the app proceed
to the next step.
Otherwise, see below.
First time setup
Before using the app, users and site
information must be set up within the InVue
LIVE web portal.
This should be completed by a manager or
admin using the information sent by InVue
Customer Service.
If you are a manager or admin and have not
received this information via email from InVue
Customer service, please submit a service
request.
4a To check that the Panic Button
has been successfully enrolled,
click the menu icon at the top of
the screen.
1 If not already installed on your
smart phone or tablet, download
the InVue LIVE Display app from
the Google Play store. Log in using
the information provided by your
manager or admin.
4b Select "Panic Buttons" from the
drop-down menu to check status
and/or make changes.
1
2 With the InVue LIVE Display app
open on your smart phone or
tablet, press the "Add or Scan
InVue Device" button.
5 Once successfully enrolled in the
app, pull the battery tab from the
panic button.
For technical assistance call
NA / LATAM // 704.752.6513 • 888.55.INVUE
EMEA // +31.23.8900150
APAC // +852.3127.6811