Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for inVue LTO III
Summary of Contents for inVue LTO III
- Page 1 LTO III Laptop & Tablet Security LTO1551...
- Page 2 (if powering up merchandise, order separately) 4. InVue or OEM Power Supply (if powering up merchandise, order separately) System Overview The LTO III Laptop and Tablet Security protects all tablets Laptop & Tablet Security and laptops. LTO1551 Power Supply Power Connector...
- Page 3 Attaching Merchandise Wipe display counter and back of merchandise with alcohol wipe provided. Let it dry completely. Laptop (See page 5) Tablet (See page 10)
- Page 4 Remove white tab to activate battery. Snap cover onto Remove clear film from adhesive on alarm module. alarm module. Push down on cover until you hear a Confirm LTO cord is towards bottom of merchandise. “click.” Center LTO alarm module on back of merchandise and press firmly for at least 10 seconds.
- Page 5 Adhesive mount or screw mount fuse of laptop security Screw Mount: Remove cover. Drill holes and tighten to display counter. Adhesive Mount: Remove clear film screw. Attach cover back on fuse end. from base of fuse end. Place on display counter and press firmly for at least 10 seconds.
- Page 6 Attaching Merchandise – Tablet Wipe back of merchandise with alcohol wipe provided. Let it dry completely. Power Supply Power Connector (InVue or OEM) (determined by merchandise)
- Page 7 Remove white tab to activate battery. If powering Remove clear film from adhesive on alarm module. merchandise: Plug power connector into alarm Plug power connector into merchandise. Confirm LTO module. Snap cover onto alarm module. Push down cord is towards top of merchandise. Center LTO alarm on cover until you hear a “click.”...
- Page 8 Plug InVue power supply or OEM power suppy to LTO Arm/Disarm LTO fuse. Plug power supply into outlet. Place key on lens of LTO. Press button on key once to arm or disarm alarm.
- Page 9 Re-merchandising – Removing Cover Re-merchandising – Removing Alarm Unit Squeeze both sides of cover and lift up to remove cover. To change tablet position on display (shown below): Remove both screws with screwdriver to remove alarm unit. To completely remove position on display: Use removal tool (MP254 - not shown).
- Page 11 Corporate Office (North America) // 704.752.6513 • 888.55.INVUE Europe, Middle East & Africa // +31.23.8900150 Asia Pacific // +852.3127.6811 Latin America // +52.55.90003957 © 2014 InVue Security Products Inc. All rights reserved. InVue is a registered trademark of InVue Security Products.
Need help?
Do you have a question about the LTO III and is the answer not in the manual?
Questions and answers