Trouble Shooting; Disposal And Recycling; Warranty - Dexter Laundry DCM160L Manual

EN
legal & safety instructions

8. TROUBLE SHOOTING

Problems
Motor stops
Thermal protector works
working
1. Belt has broken
Drum fails to
2. Motor stops working due to
rotate

9. DISPOSAL AND RECYCLING

This marking indicates that this
product should not be disposed
of with other household waste
throughout the EU. To prevent
possible harm to the environ-
ment or human health from
uncontrolled waste disposal,

10. WARRANTY

1. General Terms and Conditions of
the Adeo Services manufacturer
warranty:
Adeo Services offers a manufacturer warranty for
its products.
Scope of the Adeo Services manufacturer
warranty:
Adeo Services products are designed and built to
offer quality performance for normal use. If a prod-
uct proves to be faulty during the warranty period
under normal operating conditions, it is the respon-
sibility of Adeo Services to repair or replace it.
The Adeo Services warranty covers the repair or
replacement (at the discretion of Adeo services)
of your equipment placed on the market by Adeo
Services if it proves to be faulty due to a material
or manufacturing fault during the warranty period.
If a part required for the product to operate cor-
rectly is unavailable, Adeo Services undertakes to
replace the part with a part that has equivalent
characteristics and performance levels.
A warranty claim does not affect your rights under
the legal guarantees set out by local regulations.
Probable causes
overheating
Corrective actions
Stop working for a while until motor cools
1. Replace the new belt
2. Stop working for a while until motor
cools
recycle waste responsibly to promote the
sustainable reuse of material resources. To
return your used device, please use the return
and collection systems or contact the retailer
from which the product was purchased. They
can take this product for environmentally safe
recycling.
Cases excluded from the Adeo Services
manufacturer warranty:
The Adeo Services manufacturer warranty is not
intended to apply to the cases in the following list:
• Normal wear and tear of the product and/or its
components (e.g. fuse, belt, brush, batteries,
filters, protective coating, etc.)
• Accidental damage (linked to the product falling,
an impact or poor installation of the product)
• Damage resulting from use that is not compliant
with the instructions in the user manual and/
or the packaging (e.g. incorrect power supply
voltage)
• Damage caused by not complying with the pro-
duct maintenance recommendations
• Damage caused by external sources such as
transportation, inclement weather, power cuts or
power surges
• Cosmetic damage including, but not limited to,
scratches,scores or plastic item breakage
• Failures caused by cases of force majeure (event
outsidethe control of Adeo Services, which could
not be predicted when the product was sold
and the effects of which could not have been
avoided by taking suitable measures (e.g. natural
disasters))
• Failures caused by:
- Negligent use, incorrect use, incorrect han-
dling or reckless use of the product
- Use not compliant with the product user
manual
- Use of the product for purposes other than
114