Maintenance - Dexter Laundry DCM160L Manual

EN
legal & safety instructions
For best results, proceed as follows:
1. Add the required amount of gravel into the drum.
2. Add the required amount of cement into the drum.
3. Add the required amount of sand into the drum.
4. Pour the required amount of water into the drum.
Emptying
Do not turn the mixer off while full with a load. Empty the
drum while the drum is rotating.
Cleaning
Never put hands inside the drum while the drum is rotating.
Thoroughly clean the mixer at the end of each
day's operation. Keep your mixer clean. The
slightest trace of material left in the drum will
harden and attract more each time you use it
until the machine becomes useless. Dried ce-
ment should be scraped out of the drum. Do not
throw bricks into mixer drum to clean it out. Do
not beat on the drum with a shovel, hammer or
other tools to break up accumulations of dried
Do not pour or spray water directly over the motor cover,
especially the openings in it.
Wipe off any material on the outside of the motor cover.
Do not use petrol, turpentine, lacquer or paint thinner, dry
cleaning fluids or similar products. The use of chemical
products or solvents may affect the properties of the cover
which is made of high-density polyethylene PET

7. MAINTENANCE

Ensure the extension cord is always unplugged before the
motor cover is removed.
cement mix, as this may damage the mixer.
The drum may be scoured for approximately 2
minutes, using a 1" gravel and water mixture.
Then discharge the gravel/water mixture and
hose down the drum assembly inside and out.
The IP45D protection class construction of the
concrete mixer enables you to hose down the
drum assembly safely.
112