Fisher & Paykel CONTEMPORARY HC24DCXB4 User Manual page 6

This product is not intended for connection to a rigid metal conduit.
z
The appliance must be able to be disconnected from mains supply after installation.
z
This may be done with a wiring switch in accordance with the wiring rules.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal-cutout,
z
this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Ensure that any applicable regulations concerning the discharge of exhaust air are
z
adhered to.
Consult a qualified electrician if the grounding instructions are not completely
z
understood, or if doubt exists as to whether the appliance is properly grounded.
Exhaust air must not be discharged into an existing flue that is used for exhausting
z
fumes from appliances burning gas or other fuels.
WARNING: Failure to install the screws or fixing device in accordance with these
z
instructions may result in electrical hazards.
Ensure the glass perimeter plate can open freely without obstruction at all times.
z
Maintenance
Unplug or disconnect the appliance from the power supply before servicing or cleaning.
z
There is a risk of fire if cleaning is not carried out in accordance with the instructions in
z
your user guide.
6
SAFETY AND WARNINGS