Table of Contents
Advertisement
Installation
1
Attach the antennas to the SMA connectors on the back of the router to the
ports labelled "Main" and "Aux." Turn clockwise to fasten the antenna.
2
Connect cables to a terminal base. Once it is powered on, the router's indicator
lights will activate.
3
Wait a minute or two after plugging in the router, as it may take a few moments
for it to get up and running.
WARNING
!
Improper wiring may cause damage to the device, please be sure to connect the
red wire ( positive ) to the left port, yellow wire ( negative ) to the right port.
Scan QR code
Scan the QR code on the label at the top of the router or visit https://linovision.com/
pages/vsim-data-plan, to activate your vSIM Data Plan.
4G Mag-mount antenna x 1
vSIM Cellular Router
IOT-R51W
Power Input: DC 6 ~ 35V
Default IP: 192.168.1.1
Username: admin
Password: admin
WiFi SSID: 2.4 _20xxxxxxxxxx
WiFi Pass: 12345678
IMEI: XXXXXXXXXXXXXXX
SN:
XXXXXXXXXXXXX
To activate data plan, please visit
https://linovision.com/pages/vsim-data-plan
1
WiFi Folding antenna x 1
LINOVISION
+ -
RX TX GNDA
B
ETH
RST
Advertisement
Table of Contents
