Table of Contents
Advertisement
10. Connect the other end of the
negative ( ) cable away from
the dead battery, but not near
engine parts that move.
11. Start the vehicle with the good
battery and run the engine.
12. Press the unlock symbol on
the remote keyless entry
transmitter to disarm the
security system, if equipped.
13. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it needs
service.
Notice: If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be
covered by the vehicle warranty.
Always connect and remove the
jumper cables in the correct
order, making sure that the
cables do not touch each other or
other metal.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine
Part or Remote Negative ( )
Terminal
B. Good Battery or Remote
Positive (+) and Remote
Negative ( ) Terminals
C. Dead Battery or Remote
Positive (+) Terminal
Vehicle Care
To disconnect the jumper cables
from both vehicles:
1. Disconnect the black
negative ( ) cable from the
vehicle that had the dead
battery.
2. Disconnect the black
negative ( ) cable from the
vehicle with the good battery.
3. Disconnect the red positive (+)
cable from the vehicle with the
good battery.
4. Disconnect the red positive (+)
cable from the other vehicle.
5. Return the underhood fuse block
cover to its original position,
if applicable.
9-77
Advertisement
Chapters
Table of Contents
