Table of Contents
Advertisement
6-54
Infotainment System
Using the Call Command
1. Press
/
.
For vehicles without a
navigation system, the
system responds Ready ,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
Hands Free . The system
responds Ready , followed
by a tone.
2. Say Call . The system responds
Call using <phone name>.
Please say the name tag ,
followed by a tone.
3. Say the name tag of the person
to call.
If the system recognizes
the name tag it responds
OK, calling, <name tag>
and dials the number.
If the system does not
recognize the name tag, it
confirms the name tag
followed by a tone. If the
name tag is correct, say
Yes . The system responds
with OK, calling, <name
tag> and dials the number.
If the name tag is not
correct, say No . The
system will ask for the
name tag again.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re dial Command
1. Press
/
.
For vehicles without a
navigation system, the
system responds Ready ,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
Hands Free . The system
responds with Ready ,
followed by a tone.
2. After the tone, say Re dial . The
system responds Re dial using
<phone name> and dials the
last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Advertisement
Chapters
Table of Contents
