Table of Contents
Advertisement
Changing bulbs
2
40
Parking light
e
Attention:
Switch off the ignition before
changing a bulb.
L
Note:
Avoid touching the glass of new
bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when inserting them.
1
2
4
3
• Place the motorcycle on its
main stand [Dakar: side stand]
– Make sure the ground is
level and firm.
• Pull off multi-pin plug 2
• Pull the rubber sleeve 1 to the
rear to remove
• Pull bulb holder to the rear
and 4 out of the headlight
housing
• Pull bulb 3 out of bulb holder 4
• Installation is the reverse of
the removal procedure
– Parking light bulb: 12 V 5 W
Advertisement
Table of Contents
