Telnet Setup; Figure 4.10 Configuration; Figure 4.15 Tera Term Telnet Connection Screen; Figure 4.16 Telnet Setup Menu - Iserver Configuration Page - Omega iServer DPi8 User Manual

4.9 Telnet Setup

Telnet stands for Telecommunications Network, is a protocol that provides a way for users (or
clients) to connect to computers (or servers) on a network, whether in the next building or
across the other side of the world.
You can open a Telnet session using other terminal emulation programs like Tera Term Pro
(downloadable from the internet), which is a free software for MS-Windows. It supports
VT100 emulation, Telnet connection and serial port connection.
Once the Telnet mechanism is decided we can open a session by simply typing the IP
address of the iServer, and setting the Port on 2002 for logging into the iServer Configuration
page or 2000 for accessing the serial device connected to the iServer's serial port.
Figure 4.15
Tera Term Telnet Connection Screen
The default password for Telnet Login is 00000000 and can be changed if
desired. Telnet works only in RS-232 mode
Firmware Version 4.1
Admin Password:00000000
Admin. Login Successful
p
BD = 9600 (5)
PT = odd (1)
ST = 1 bit (0)
DT = 7 bits (0)
MD = RS-485 (1)
TO = 500
TT = SLAVE (1)
TN = 0
HN = eis1376
IP = 192.168.1.200
LP = 12345678
SP = 00000000
TP = iSeries (3)
RE = enable (1)
RI = 0.0.0.0
RP = 02000
GW = 0.0.0.0
SM = 255.255.255.0
EC = 0D
PP = 02000
FC = None (0)
MB = disable(0)
TU = TCP (0)
CC = not used(0)
CT = 01000
FE = enable (1)
EP = disable(0)
CP = 1234abcd
WB = enable (1)
MAC = 00:03:34:00:13:76
q
Quit
Figure 4.16 Telnet Setup
iServer Configuration Page
26
Configuration
Firmware Version 4.1