Introduction - Westinghouse iGen2800 User Manual

INTRODUCTION

SPECIFICATIONS
AC Voltage................................................................. 120V
Power (Running).................................................... 2,200W
Power (Peak) ......................................................... 2,800W
Rated Voltage ............................................................ 120V
Frequency................................................................. 60 Hz
Phase .......................................................................Single
RPM ...........................................................................5,000
Power Factor .................................................................1.0
Insulation Class ............................................................... F
Maximum Ambient Temperature ................... 104°F (40°C)
Fuel Type ...................Unleaded gasoline (87 – 93 Octane)
Do not use E15 or E85 fuel in this product.
NOTICE
This product is designed and rated for
continuous operation at ambient temperatures be-
tween 23°F (– 5°C) and 104°F (40°C). If needed, this
product can be operated in extremely hot or extremely
cold temperatures for short periods. If the product is
exposed to extreme temperatures during storage, it
should be brought back within the optimal tempera-
ture range before operation. This product must always
be operated outdoors in a well-ventilated area and far
away from doors, windows, and other vents.
Maximum wattage and current are subject to and
limited by such factors as fuel BTU content, ambient
temperature, altitude, engine conditions, etc. Max-
imum power decreases about 3.5% for each 1,000
feet above sea level, and will also decrease about
1% for each 10°F (6°C) above 60°F (16°C) ambient
temperature.
Email us at service@wpowereq.com
HAVE QUESTIONS?
or call 1-855-944-3571
Fuel Capacity................................. 0.98 gallons (3.7 liters)
Oil Capacity ........................................... .11.8 oz. (.4 liters)
Oil Type .........................................................SAE 10W-30
Spark Plug ..............................................................E6RTC
Spark Plug Gap ............ 0.024 – 0.032 in. (0.60 – 0.80 mm)
Valve Intake Clearance ........................0.0031 – 0.0047 in.
Valve Exhaust Clearance ....................0.0051 – 0.0067 in.
AC Grounding System ................................ floating neutral
NOTICE
The effect of altitude on horsepower will
be greater if no carburetor modification is made. A de-
crease in engine horsepower will decrease the power
output of the generator. Contact our service team to
order altitude kits.
NOTICE
Thank you for choosing Westinghouse!
PLEASE READ BEFORE RETURNING THIS PROD-
UCT FOR ANY REASON.
If you have a question or experience a problem with your
Westinghouse purchase, call us at 1-855-944-3571 to
speak with an agent.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
(0.08 – 0.12 mm)
(0.13 – 0.17 mm)
English | 3