Table of Contents
Advertisement
E195661
3. Insert the new battery. Refer to the
symbols inside the transmitter for the
correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.
4. Reinstall the battery housing cover
onto the transmitter.
Note: Replacing the battery does not erase
the programmed key from your vehicle. The
transmitter should operate normally.
Car Finder
Press the button twice within
three seconds. The horn sounds
and the direction indicators
E138623
flash. We recommend you use this method
to locate your vehicle, rather than using
the panic alarm.
Sounding the Panic Alarm
Press the button to sound the
panic alarm. Press the button
again or switch the ignition on to
E138624
turn it off.
E-Series (TE4) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Keys and Remote Controls
Note: The panic alarm operates regardless
of the ignition position.
REPLACING A LOST KEY OR
REMOTE CONTROL
Replacement keys or remote controls can
be purchased from an authorized dealer.
Authorized dealers can program remote
controls for your vehicle. See Passive
Anti-Theft System (page 43).
39
Advertisement
Table of Contents
