Storage - Silvercrest SPR 600 A1 Operating Instructions Manual

Clean the attachment 9 - q with water and washing-up liquid. If neces-
■
sary, use a moistened cotton swab to clean the inside of the attachments
9 - q. We recommend additionally applying a suitable disinfectant.
Allow the attachments 9 - q to dry before the next use.
Note:
If the locking rings 1 break during cleaning, replace them with the provid-
ed spare locking rings 7. If necessary, you can order more filters 8,
locking rings 1 and attachments 9 - q (see section Ordering re-
placement parts).
In case of soiling, pull the locking rings 1 off the suction head 2. Use
■
tweezers, if necessary. Clean the locking rings 1 in lukewarm water with
some washing-up liquid.
Wipe the area around the suction head 2 with a slightly damp cloth.
■
Then wipe it again with a dry cloth. Clean the other surfaces of the
appliance only with a dry cloth.
Place the locking rings 1 back on the suction head 2 and slide them into
■
the provided grooves.

Storage

■ Store the appliance and its accessories in a dry and dust-free location.
■ To ensure a long battery life, charge the battery at regular intervals.
SPR 600 A1
GB │ IE │
19 ■