Waeco AirConServiceCenter BMW5500G RPA Operating Manual page 107

BMW5500G RPA
11. Enter the correct user name, and then press ENTER to confirm:
I
NOTE
The user is created and the menu changes again to the user selection.
You can now create another user or exit the menu by pressing STOP.
8.3.2 Entering user codes
When you switch on the air conditioning service station, the unit data
appears in the display. If a user code has been created, the same code
must be used to enable the station.
1. Enter the correct user code.
If you enter an incorrect user code, the following error message
appears:
Once the correct code is entered, the station is enabled and it starts
up. The user's name is displayed:
EN
ADM AREA
User number
User name
John Citizen
ADM AREA
User number
John Citizen
ENTER USER CODE
WRONG CODE
John Citizen
Operation
1
1
----
107