ASSEMBLY
4.
Install spiked bumper (D).
Secure with 2 bolts.
5.
Mount guide bar (E) and slide
toward sprocket (F) to make
saw chain installation easier.
6.
Install saw chain as shown.
(Ensure cutters are pointing in
the right direction.)
7.
Install the sprocket cover over
the guide bar stud. Ensure that
chain tension adjuster (G) fits
into guide bar hole.
8.
Tighten sprocket cover nut
finger tight.
9.
Hold the guide bar nose up and
turn the adjuster (H) clockwise
until the chain fits snugly
against the underside of the
bar.
30
DCS-2500TN
F
C G
H
© 7/23 ECHO Incorporated
C D
E
X7508220500