Saw Chain Maintenance - Echo DCS-2500TN Operator's Manual

MAINTENANCE

Saw Chain Maintenance

Remove the battery before sharpening chain. Always wear
gloves when working on chain. Otherwise serious personal
injury may result.
The following factors will increase the risk of kickback:
Top plate angle too large
◆
File diameter too small
◆
Depth gauge too large
◆
Note: These angles are referred to as 80TXL. For chains of other
brands, follow manufacturers instructions.
Properly filed cutters are shown below.
A. Top plate angle 80TXL 25°
B. Top plate cutting angle 80TXL; 70°
C. Depth gauge 80TXL; 0.025 in
D. Parallel
52
DCS-2500TN
X7508220500
© 7/23 ECHO Incorporated