Maintenance And Care - Echo DCS-2500TN Operator's Manual

MAINTENANCE
4. Hold the file horizontally.
5. Avoid touching the tie straps
with the file.
6. Sharpen the most damaged
cutter first and then take all
the other cutters back to the
same length.
7. The depth control determines
the thickness of wood chip produced and must be maintained correctly
throughout the chain life.
8. As the cutter length is
reduced, the depth control
height is altered and must be
reduced.
9. Position the depth gauge, and
file off any of the depth control
which protrudes.
10. Round off the front of the
depth control to allow smooth cutting.
11. Drive link serves to remove sawdust from the groove of the guide bar.
Therefore, keep the lower edge of the drive link sharp.

Maintenance and Care

Remove battery before performing maintenance procedures.
Cleaning battery and battery compartment
Risk of electric shock or fire. Do not use conducting materials
to clean battery or battery compartment. Otherwise serious
personal injury may result.
54
DCS-2500TN
10°
X7508220500
© 7/23 ECHO Incorporated