Initial Operation; Preparation Of Coffee - Team Kalorik TKG CM 1210 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
Fax +32 2 359 95 50
Important: never put the jug in a microwave oven to warm up the coffee. We will not take
any responsibility if you do so.
Your appliance must never be switched on through an external timer or any kind of
separate remote control system.
(*) Competent qualified electrician: after-sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
FIELD OF APPLICATION/OF OPERATION
Use the appliance for domestic purposes only and in the way indicated in these
instructions.
This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
environments.
Farms.
The use by clients of hotels, motels and other environments with a residential
character.
Environments of the "bed and breakfast" type.

INITIAL OPERATION

When you use your appliance for the first time, pour fresh water into the water tank and switch
on the appliance (without coffee).
Once all the water has passed through, switch the appliance off and let it cool down. When it
is cold enough, repeat the process with fresh water. Repeat this process 3 times.

PREPARATION OF COFFEE

Open the lid of the water tank.
Using the glass carafe, pour the desired amount of water into the water tank. Make sure
not to overfill by respecting the maximum level indicated on the water tank.
Place the filter holder into the coffee maker. Insert a paper filter or permanent filter
(depending on the model) in the filter holder and add the desired quantity of ground
coffee (1 teaspoon per cup, approximately 6g).
Please note: fold the bottom and the side edges of the paper filter in such a way that it fits
perfectly in the filter holder. Put back the filter holder, making sure it is placed correctly.
Never forget to close the lid of the water tank and to place the glass carafe on the
warming plate before switching on your coffee maker.
Press the on-off switch to switch on the coffee maker. The pilot light of the switch will be
illuminated, indicating that your appliance is working. A device allows you to keep coffee
warm for as long as the coffee maker is working and the jug is standing on the appliance.
Caution: The hotplate is switched off automatically after 40 minutes. You can always switch off
the coffee maker manually by pressing the on-off switch.
Make sure that you never let an empty jug on the appliance.
When you remove the jug from the appliance, a non-drip valve will automatically operate
to stop any drops of coffee dripping onto the hotplate. Replacement of the carafe
automatically opens the non-drip valve and allows remaining coffee to filter through into
the jug.
Wait until the brewing process is finished and the filter has run empty before removing the
jug.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
6
TKG CM 1210 - 150112
Assembly page 6/36

Advertisement

Table of Contents
loading

Table of Contents