Mounting Instructions - Victron energy Blue Smart IP22 12/15 Manual

Mounting instructions

Mounting instructions:
Mount vertically with the power terminals facing downward. Observe a minimum clearance of 4" (10cm) under
and above the product for optimal cooling.
We recommend to use 4 screws, one on each corner, type: self tapping pan head #8 or #10 with a length of ¾"
(diameter 4.8mm, length 19mm).
Align the product on the surface and use it to mark the location for the screws.
Fit the two lower screws to the surface but leave them about 1/8" (3mm) from the surface.
Place the product on the two lower screws and hold it while fitting the two upper screws. Do not overtighten the
screws.
If necessary, the lower screws can be tightened with a hand screwdriver. Pay attention not to damage the
powercord.
Blue Smart version
Set-up, monitor and update the charger (add new features when they become available) using Apple and Android
smartphones, tablets or other devices with the VictronConnect App.
VictronConnect is available to users of Windows PCs, macOS X, iOS and Android phones, as well as tablets.
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app
VictronConnect: Blue Smart IP22 Charger pages
When the Blue Smart charger is powered-up it will be discoverable
using the VictronConnect app on your device.
The 'home' page shows information about the battery voltage, charge
current, and where your battery is in the charging-cycle.
To access the Settings button, click on the cog icon at the top right of
the screen. From here you can choose a preset charge algorithm, you
can select the charge current; and you can choose to employ the
charge algorithm for a Li-ion battery when that is appropriate.