Table of Contents
Advertisement
Tip: Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
the wine conditioning unit is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Push the wine conditioning unit care-
fully into the installation niche.
If the wine conditioning unit cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear feet slightly (see "In-
stallation – Aligning the wine condi-
tioning unit") and slide the appliance
into the installation niche.
Remove the edge protection from
the adjacent cabinet fronts.
Aligning the wine conditioning unit
The installation aids on the appli-
ance door provide assistance with the
alignment of the wine conditioning unit
in the installation niche.
The installation aids are suitable for a
cabinet front thickness of 3/4" or
1 1/2" (19 mm or 38 mm).
Align the wine conditioning unit with
adjacent cabinet fronts as described
below.
Cabinet-front thickness of 3/4" (19 mm)
Installation
33
Advertisement
Table of Contents
