Canon iPF710 Service Manual page 37

Chapter 1
First Level
First Level
[Interface Setup] [TCP/IP]
[NetWare]
[AppleTalk]
[Ethernet Driver]
[Ext.Interface]
[Init. Settings]
[Maintenance] [Maint. cart.]
1-26
Second Level
Second Level Third Level
[IP Setting]
[NetWare]
[Frame Type](*6)
[Print Service](*6)
[On]
[Off]*
[Auto Detect]
[Comm.Mode](*7)
[Ethernet Type](*7) [10 Base-T]*
[Spanning Tree]
[MAC Address]
[No]
[IEEE1394]
[No]
[Yes]
[No]
[Yes]
Third Level Fourth Level
[BOOTP]
[RARP]
T-1-6
Fourth Level
[IP Address]
[Subnet Mask]
[Default G/W]
[On]
[Off]*
[Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]*
[Off]
[Half Duplex]*
[Full Duplex]
[100 Base-TX]
[Not Use]*
[Use]
Fifth Level
[Off]*
[On]
[Off]*
[On]
[Off]*
Fifth Level
0.0.0.0* to
255.255.255.255
0.0.0.0* to
255.255.255.255
0.0.0.0* to
255.255.255.255