Digital Tuner - Philips AJL308/78 User Manual

Table of Contents

Advertisement

Digital tuner

1 During the alarm call, press any button except
REPEAT ALARM /
.
CONTROL
is displayed.
Repeat alarm
This will repeat your alarm call at 9-minute
intervals.
1 During the alarm call, press
REPEAT ALARM /
.
CONTROL
flashes.
Switching off the alarm completely
1 Press repeatedly ALARM 1 or ALARM 2
until
is changed to
➜When alarm is deactivated,
Helpful hints:
During alarm call, if no button is pressed, alarm
call will last 30 minutes.
Tuner
Tuning to radio station
1 Press TUNER to switch on radio (FM only).
2 Press and hold 1 2 for about 2 seconds, then
release.
➜The radio automatically tunes to a station
of sufficient reception.
3 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press 1 2 briefly
and repeatedly until you have found optimal
reception.
BRIGHTNESS
BRIGHTNESS
.
is dispalyed.
Turning on/off radio
To turn off radio, press OK.To turn on radio,
press OK again.
To improve reception:
FM: Extend and adjust the pigtail for optimum
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory, manually or automati-
cally (Auto store).
Manual programming
1 Tune to your desired station (See "Tuning to
radio station").
2 Press and hold TUNER for about 2 seconds,
then release.
➜Preset number will flash.
3 Press 34 once or more to allocate a
number from 1 to 20.
➜Preset number will flash.
4 Press TUNER again to confirm.
5 Repeat steps 1-4 to store other stations.
Note:
– You can erase a preset station by storing
another frequency in its place.
Auto store
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1 In TUNER mode, press MENU to display
tuner menu.
2 Press 4 to select "Tuner Auto Program".
3 Press OK.
➜Available stations are programmed (FM).
After all stations are stored, the first auto-
store preset station will then automatically
play.
To listen to a preset or autostore
station
Press 34 once or more until the desired
preset station is displayed.

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Ajl308

Table of Contents