Failure Codes - Qwic PRD9 Manual

Display settings
Press the 'ON/OFF' button on the back of the display for
5 seconds to open the 'settings' menu. Use the 'PLUS'
and 'MINUS' buttons to adjust the settings per menu
and press the 'LOGO' button for 1 second to confirm
the setting and continue to the next setting option.
Setting options in the setting menu:
Language
Choose from: NL (Dutch), EN (English), DE (German), FR
(French), IT (Italian), ES (Spanish).
Clock
First, you can adjust the 12 or 24 hours display format
with the 'PLUS' and 'MINUS' buttons. You can confirm
the setting by shortly pressing the 'LOGO' button. Then,
you can adjust the time with the 'PLUS' and 'MINUS'
buttons. Shortly pressing the 'LOGO' button toggles
between hours / ten minutes / minutes.
By pressing the 'ON/OFF' button you will leave the
settings menu.

Failure codes

When 'ERR' appears in the screen, there is an error
with the speed sensor. Check if the speed sensor at the
rear wheel is adjusted correctly. The magnet may be a
maximum of 15 mm away from the sensor and needs to
be at either one of the two notches.
If a motor symbol with 'HOT' appears in the top left of
the screen, the temperature of the motor is too high.
Let the motor cool down. Cooling down of the motor
is also possible by continuing to cycle without motor
assistance.
If 'CHANGE DISPLAY BATTERY' appears in the screen
after switching it on, you can change the battery of
the display. For this you need to remove the 4 phillips
screws on the back of the display, after which you
can turn the battery cap open with a (new) battery.
The battery is of the type CR2032. After replacing the
display battery you can screw the parts back together
as they were. For removing the display from the handle
bars it is not neccessary to remove other parts (grip or
brakes) from the handle bars.
It is possible that other problems occur. In that case,
be in contact with your dealer soon so that a potential
repair can be executed fast.
Display & Controls: Midmotor models 45