Table of Contents
Advertisement
I
NSTALLING
DESK INSTALLATION
To install as a desk telephone, use the long modular line cord
provided and refer to the diagram.
•
On the bottom of the
telephone base, locate
the modular jack inside the
cavity. Plug one end of the
line cord into the jack.
•
Route the cord as
shown through the chan-
nel to the back of the tele-
phone base.
•
Plug the unattached end of the line cord into the modular
wall jack.
WALL INSTALLATION
To install a wall telephone, use the short modular line cord
provided and refer to the diagram.
•
On the bottom of the telephone base, locate the modular
jack inside the cavity. Plug one end of the short line cord into
the jack.
•
While holding the telephone base close to the mount-
ing location, plug the unattached end of the line cord into the
modular wall jack. Excess line cord must be folded into the
cavity.
•
Note the two mounting studs on the modular wall jack.
Align the telephone so that the two mounting studs are inserted
into the two slotted holes in the telephone base. Slide the
telephone down until it is tightly seated.
Y
T
OUR
7
ELEPHONE
Advertisement
Table of Contents
