Installation - Cortelco 2933 Owner's Instruction Manual

CHECK THE CONTENTS OF THE BOX
Box should contain

Handset with handset cord and phone base

Telephone line cord (9 feet long)

Telephone line cord (4 inches long)

Desk Stand

User's manual
INSTALL THE TELEPHONE

Plug one end of the modular line cord into the line jack on the bottom of
the phone. Use the short line cord for wall mounting and the long line
cord for desk mounting.

Plug the other end of the cord into the telephone line jack.

Plug one end of the coiled cord into the telephone handset

Plug the other end of the coiled cord into the handset jack on the left side
of the phone.

Snap the desk stand onto the bottom of the telephone if it is not wall
mounted.

Place the telephone on a flat surface or mount it on a wall jack.
DIAL MODE

If your telephone line accepts tone dialing, set the Pulse /Tone switch to
the Tone position. The switch is located on the back of the telephone.
The default position is Tone dialing.

If your telephone line requires pulse dialing, set the Pulse /Tone switch to
the Pulse position. While in Pulse mode, pressing the * key will switch to
Tone mode until the call ends.

INSTALLATION

5