Draining Remaining Water And Cleaning The Pump Filter; In Order To Clean The Dirty Filter And Discharge The Water - Beko WDA914401W User Manual

Maintenance and cleaning

6.6 Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging
the pump impeller during discharge of washing water. Thus, the water will be discharged without any
problem and the service life of the pump will extend.
If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged
or in every 3 months. Water must be drained off first to clean the pump filter.
In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing
of the water, water may have to be drained completely.
CAUTION
¾ Foreign substances left in the pump filter may damage the machine or
A
may cause noise problem.
¾ If the product is not in use, turn the tap off, detach the supply hose and
drain the water inside the machine against any freezing possibility in the
region of installation.
¾ After each use close the supply hose tap of the product.

6.6.1 In order to clean the dirty filter and discharge the water:

1. Unplug the machine to cut off the supply power.
CAUTION
A
¾ Temperature of the water inside the machine may rise up to 90 ºC. To
avoid burning risk, cleaned the filter after the water in the machine cools
down.
2 Open the filter cap.
Press the tab on the filter cap downwards and pull the piece out towards yourself.
User's Manual
55 / EN