Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5COM52XXD Series Fan
UL Model NO. : 5COM52XXD
RETAILER NAME:
RETAILER ADDRESS:
8.8 kgs
19.4 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 5COM52 D Series
Summary of Contents for Monte Carlo Fan Company 5COM52 D Series
- Page 1 Owner’s Guide and Installation Manual 5COM52XXD Series Fan UL Model NO. : 5COM52XXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8.8 kgs 19.4 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2015 Monte Carlo Fan Company 5/10/2015... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2015 Monte Carlo Fan Company 5/10/2015...
- Page 4 Note: Flush mount is not available with irregularity in the ceiling or Outlet box. vaulted ceiling. Make sure the studs protruding from the bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2015 Monte Carlo Fan Company 5/10/2015...
-
Page 5: Safety Cable Installation
Note : If Installing The Secondary Support Safety Cable in the U.S., Do Not Remove Knockouts In The Outlet Box. © 2015 Monte Carlo Fan Company 5/10/2015... - Page 6 Be sure plugs connection reverse switch on light kit, and then install the light kit onto the top plate clasped together completely. with the 3 set screws removed in step 21 and tighten all screws securely. © 2015 Monte Carlo Fan Company 5/10/2015...
- Page 7 Note: Reverse switch must be set either tightening the finial. DO NOT OVER TIGHTEN way completely. If the reverse switch is the finial as glass may crack or break. set in the middle position, fan will not operate. © 2015 Monte Carlo Fan Company 5/10/2015...
-
Page 8: Troubleshooting
WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off, replace bulbs with the correct wattage bulbs, Turn power on. © 2015 Monte Carlo Fan Company 5/10/2015... - Page 9 May.2015...
Need help?
Do you have a question about the 5COM52 D Series and is the answer not in the manual?
Questions and answers