Table of Contents
Advertisement
If the feed is too thick or much, please mind the status of the machine and the
engine when slicing. Make sure the rotating speed of the gasoline engine all
the time. In order to ensure the working efficiency and experience, please feed
materials properly.
When chipping dry branches, please note that the maximum diameter should
not exceed 4cm.
If the branches are too thick, please chop or trim it and then shred it separately.
When chopping the branches approaching the limit diameter, please grasp the
material and push with your hands to avoid the danger of swinging back and
forth.
The emergency stop switch is only used for emergency situations, normal
shutdown should firstly reduce the engine to idle speed for a
few
minutes,then switch off the engine.
Maintenance
Tip: Regular inspection and maintenance work can effectively ensure the
normal operation of the machine.
Warning
Please stop the machine before doing any maintenance, inspection and so on,
and wait until it stops rotating completely. Place the machine in a horizontal
position.
1, maintenance of gasoline engine
Routine inspection and maintenance can ensure
the perfect performance of the machine. Seasonal
maintenance is strongly recommended by professionals.
The adjustment of carburetor is required to be
operated by the specialized person of distributor.
The incorrect regulation of carburetor will directly
affect the performance of gasoline engine.
Clean the gasoline engine regularly, especially the location
of the oil injection, gasoline tank.
Regularly check if the oil is in normal level.
After the oil is wiped up,put the oil ruler back and
check the oil level. (see right picture),
if it's below the minimum level, refill the oil, if
the oil is above the highest position,please release some oil appropriately.
9
Advertisement
Table of Contents
