Table of Contents
Advertisement
Machine assembly
Machine parts diagram:
Feeding
hopper
Main
body
Wheel
Installation of feeding hopper:
Note: It is recommended that this work
should be done by two people！
1, Insert the bolt of hopper into the
bracket of the main engine.
2, Put the hopper and tighten
the bolts.
Installation of discharge chute:
Refer to the picture on the right,
1, Confirm the direction of the discharge
2, insert the bolts into the bracket above
the main engine and tighten the
corresponding bolts
Engine
Deflector
Discharge
chute
7
Advertisement
Table of Contents
